Fence Painting Cost Perth: The Complete 2026 Pricing Guide

In Perth, fence painting costs around $15 to $50 per square metre. The final price depends on the fence material, paint material and surface preparation.

In this guide, we will explain the prices as per fence types. Then we will walk through per-hour and per-linear-metre prices. Moreover, we will tell you what affects the final quote. So let’s begin. 

Fence Painting Cost in Perth | Quick Look

Here’s how that breaks down by fence type, based on jobs we’ve priced across Perth suburbs this year.

Fence Type	Painting Cost* (Perth)	Time Required
Colorbond fence	$400–$900	1–2 days
Timber paling fence	$400–$900+	1–3 days
Timber picket fence	$600–$1,200+	2–4 days
Metal or steel fence	$500–$1,000+	1–3 days
Aluminium fence	$450–$950	1–2 days
Decorative wrought iron fence	$800–$1,500+	2–4 days

*These are guide prices, not a quote. The condition of your fence matters more than the material it’s made from.

Fence Painting Cost Per Metre in Perth

Most Perth painters price a simple, single-sided fence repaint at around $25 to $50 per linear metre once materials and labour are included. The final rate depends on the fence height, material, condition and amount of preparation required. 

Paint/Finish Type	Total Cost Per Linear Metre	Best Suited For
Standard exterior acrylic paint	$25–$35/m	Colorbond and metal fences in good condition
Premium weather-resistant acrylic	$30–$40/m	Timber paling exposed to full sun
Specialist Colorbond-rated coating	$30–$45/m	Colorbond fences needing colour change or bonding
Low-VOC exterior paint	$28–$40/m	Households wanting lower-VOC options
Timber oil or exterior timber finish	$25–$40/m	Timber fences kept natural rather than solid colour

Fence Painting Cost Per Hour in Perth

If you’re getting quotes by the hour instead of a fixed price, expect labour rates of $45 to $75 per hour in Perth. These hourly rates generally cover labour, while your final project cost will also depend on paint, primer, preparation materials and other supplies. Here’s a breakdown of hourly rates and the time taken by different fence types.

Job Type	Hourly Rate (Perth)	Hours Needed
Simple wash and repaint (Colorbond, aluminium)	$45–$55/hr	4–8 hours
Timber paling, light prep	$50–$60/hr	6–12 hours
Timber picket or decorative fencing	$55–$70/hr	12–24 hours
Metal or steel with rust treatment	$60–$75/hr	8–16 hours

Now is the time to move to the factors that increase or decrease the final price of painting a fence.

What Affects Fence Painting Cost in Perth?

Here are the main factors that influence the cost of professional fence painting in Perth.

The Fence Material

Timber costs more to paint than most other materials, because the surface naturally expands, contracts and absorbs moisture over time. We’ll usually sand back rough sections and spot-repair split palings before any primer goes on.

Colorbond doesn’t absorb moisture the way timber does, but it still needs a proper wash down and, in some cases, a bonding primer, or the new coat will lift within a year. We see this a lot on Colorbond fences that were painted without that step.

Metal and steel fences are their own category again. Any rust has to be treated and primed with a corrosion-blocking product, or it bleeds straight back through the topcoat within months. Skipping this is the single most common reason a metal fence repaint fails early.

Size and Length of the Fence

Longer fences cost more. A 30 metre fence isn’t double the price of a 15 metre fence, because setup, site protection and cleanup are largely fixed costs regardless of length. However, larger or more complex fences can still have a higher total cost because they require more labour, materials and preparation.

Paint Selection

Premium exterior acrylics and specialist Colorbond-rated coatings cost more per litre than a basic hardware store paint. They’re formulated to handle UV and moisture cycling far better, which matters more in Perth than in cooler climates. 

We also offer low-VOC paint on request for households that want fewer chemicals in the yard, particularly where kids or pets use the space.

Surface Preparation

This is where most of the cost variation actually lives. Pressure washing, scraping, sanding, patching, rust treatment and priming can turn a “quick repaint” into a two-day job before a topcoat is even applied. 

We’ve walked up to fences that looked paint-ready from the footpath and found mould behind a trellis, or paling rot that wasn’t visible until we got close. Paint only performs as well as what’s underneath it, and cutting corners here is exactly why some repaints start peeling within a year.

Access and Site Conditions

A long, clear boundary fence is quicker and cheaper to paint than one hemmed in by garden beds, retaining walls, a pool, or narrow side access. Sloping blocks add time too, since every section needs extra care to keep the finish level. 

If you’re closer to the coast, salt-laden air can affect how well paint adheres, and we’ll often recommend a more corrosion-resistant primer system for those properties, particularly on metal and Colorbond fencing.

Real Life Fence Painting Cost Examples

To make your decision concrete, here’s what fence painting costs, based on jobs of different fence size and condition.

Small fence, around 15 metres. A Colorbond side fence in reasonable condition, single coat over an existing coating, minimal prep. Expect around $400 to $600, completed in a day.

Medium fence, 15 to 30 metres. A timber paling boundary fence with some weathering, needing a wash, light sanding and spot priming before two coats. This is the most common job we quote, and it sits between $700 and $1,300 over one to two days.

Large fence, 30 metres or more. A full timber picket or decorative fence run, or a longer boundary needing rust treatment on metal sections. These jobs commonly land between $1,300 and $2,000, sometimes higher for wrought iron detail work, and usually take two to four days depending on access.

How to Make Your Fence Paint Job Actually Last

A few things separate a fence painting that still looks sharp in five years from one that’s peeling by next summer.

• Don’t paint over dirt, mould or chalky old paint. Wash first, every time.
• Match the primer to the substrate; timber, Colorbond and metal all need different systems.
• Two thin coats beat one thick one. Thick coats crack and peel faster in Perth’s heat.
• Repaint before the old coat fails completely. Catching it early is cheaper than stripping it back later.

Get Professional Fence Painting in Perth from Final Touch Paint & Décor

At Final Touch Paint & Decor, we’ve been helping Perth homeowners and businesses protect and refresh their properties for more than 30 years. From Colorbond and timber fence painting to complete deck and fence painting, we take the time to prepare every surface properly because that’s what delivers a finish that lasts.

We use premium weather-resistant coatings, offer low-VOC paint options on request, and handle everything from the initial consultation through to the final clean-up. 

So if you’re looking for reliable painting services in Perth, get in touch with our team for a free, no-obligation quote.

FAQs

How long does fence painting last in Perth?

A professionally painted fence lasts 5 to 10 years, depending on the fence material, the quality of paint used, and how much sun and salt air it copes with. We’ve seen premium coatings fail early on a poorly prepped fence, and basic paint outlasts expectations on a fence that was cleaned, sanded and primed properly first.

Is it better to paint or replace a fence?

Paint if the fence is structurally sound; it’s the cheaper option by far. But once rot or rust has set in, painting just hides the damage. Replacing those sections saves money long term. 

What is the best time of year to paint a fence in Perth?

Autumn and spring. Moderate temperatures and lower rainfall give each coat time to cure properly, without the cracking risk of summer heat or the trapped moisture risk of winter rain.

How do I know if my fence needs repainting?

Watch for fading, peeling paint, exposed timber, rust spots, mould, or water soaking in instead of beading. That last sign is easy to miss but means the coating’s already failing underneath.